Accumulator modification - repair kit for 0AM / DQ200 VAG - Fault codes: P0841, P17BF, P189C, P1895, P2797

Accumulator modification - repair kit for 0AM / DQ200 VAG - Fault codes: P0841, P17BF, P189C, P1895, P2797

€172,76 EUR
Skip to product information
Accumulator modification - repair kit for 0AM / DQ200 VAG - Fault codes: P0841, P17BF, P189C, P1895, P2797

Accumulator modification - repair kit for 0AM / DQ200 VAG - Fault codes: P0841, P17BF, P189C, P1895, P2797

€172,76 incl. btw | €142,78 excl. btw
In stock

Accumulator modification – repair kit for 0AM / DQ200 VAG

Complete repair kit for a known pressure problem in the 0AM / DQ200 DSG mechatronics.
This kit has been developed as a targeted solution for malfunctions where hydraulic pressure is not properly built up or maintained.

- Targeted repair for known DQ200 problems
- Includes accumulator, mounting parts, and special wrench
- Ideal for specialized repair without replacing the complete mechatronics


Known problem with 0AM / DQ200 transmissions

With the 0AM / DQ200 DSG transmission, it often happens that the pressure accumulator causes problems.
This can lead to hydraulic pressure problems, resulting in various transmission malfunctions and fault codes.

In many cases, this is a known mechanical problem in the mechatronics and the complete unit does not need to be replaced immediately.


Common fault codes

  • P0841 / 17225 – Transmission fluid pressure sensor/switch A – range/performance
  • P17BF / 006079 – Hydraulic pump – overload protection
  • P189C / 00630 – Loss of function due to insufficient pressure build-up
  • P1895 / 006293 – Restricted operation due to starting voltage drop
  • P2797 / 19229 – Transmission fluid auxiliary pump – improbable signal

Possible complaints

  • Gearbox malfunction
  • Car does not shift properly or irregularly
  • Transmission error message
  • Hydraulic pressure not built up properly
  • Clutch does not disengage or jerks when starting

These complaints are often caused by a defective or aged accumulator.


Contents of the kit

  • Pressure accumulator
  • Accumulator mounting piece
  • Mechatronics gasket
  • Special mounting wrench

The solution

With this modification accumulator repair kit, you can professionally address the known accumulator problem.

  • Complete kit for this repair
  • Includes special wrench for correct installation
  • New gasket included
  • Prevents unnecessary replacement of complete mechatronics

A smart and cost-effective solution for a common DQ200 fault.


OE Numbers

0AM 325 587 E / 0AM325587E
0AM 325 587 F / 0AM325587F
0AM 325 587 G / 0AM325587G


Why this kit?

  • Known problem-solving repair kit
  • Suitable for 0AM / DQ200 DSG transmissions
  • Practical solution for pressure faults in the mechatronics
  • Completely supplied with necessary parts
  • Ideal for garages and transmission specialists

Order or check?

Are you unsure if this is the correct one?
Send your license plate / VIN / engine code, and we will check it!

Also interesting